Part Number : NMPD80

Proprietary High Power Passive POE with 802.3af/at Active POE 12V/19V/24V Gigabit/Multi Gigabit Splitter

PCBA Model : BPL-1515

Only PCBA Board

Introduction

The 802.3af/at POE 12V/19V/24V high power Multi Gigabit Splitter is designed to run Multi-Giga (1/2.5/5Gbps) speed PoE cables over long distances. This device splits the PoE signal into separate data and power sources and relays them into non-PoE devices. Supports IEEE 802.3at / 802.3af Active POE+ and Passive POE+ Power over Ethernet design, the DC output voltage supports 12V, 19V and 24V via DIP switch three range adjustable. It delivers Power over Ethernet (Multi-Giga Ethernet) to remote devices.

Highlight Features

  • Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3bz 2.5G/5G BASE-T, IEEE 802.3at PoE+, IEEE 802.3af PoE standards.
  • In the case of IEEE 802.3af/at active POE configuration, the maximum power output up to 27Watts and in the case of passive POE configuration, the maximum power output up to 80Watt (24V), 75Watt (19V) and 50Watt (12V) after split power and data.
  • Supports 1/2.5/5G Multi-Gigabit Ethernet speed.
  • DC Output Voltage: 12V / 19V /24V three range adjustable.
  • With hardware protection design the device will not cause any damage while changing the voltage output during operation.
  • Up to 100 meters (328 feet) application.
  • Supports Ethernet PoE to Separate to only Power and only Data output.
  • LED indicators for DC output voltage display of 12V/19V/24V.
  • Over Voltage protection and Short Circuit Protection.
  • Plug and Play, no software required.

Hardware Specification

Product Proprietary High Power Passive POE with 802.3af/at Active POE 12V/19V/24V Gigabit/Multi-Gigabit Splitter
Main Chip Solution Microsemi PD70200
Standard IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX

IEEE 802.3ab 1000BASE-T;

IEEE 802.3bz 2.5G/5GBASE-T

IEEE 802.3af Power over Ethernet

IEEE 802.3at Power over Ethernet Plus

Network Media 10BASE –T: UTP Cat. 3 or up

100BASE-TX : UTP Cat. 5 or up

1000BASE-T: UTP Cat.5e or up

2.5G/5GBASE-T : UTP Cat.5e or up

Data Transfer Rate 100M/1G/2.5G/5G (Half-duplex),

200M/2G/5G/10G (Full-duplex)

Data Pin 1/2, 3/6 & 4/5, 7/8
PoE Type Input : End-span (Type-A): PIN 1/2,3/6 ;

Mid-span (Type-B): PIN 4/5,7/8

Power Interface Input : RJ45 POE in

Output : DC out

Power Requirement 44~57 PoE Power Source

Standard Active 802.3af/at PoE Power Source or

Non-standard Passive Max to 90W PoE Power Source

DC Output Voltage 12V/ 19V/ 24V three range adjustable
DC Output Current Max 12V/4.17A , 19V/3.94A, 24V/3.33A
LED Definition DC Output LED  x3

l DC 12V output: 12V Light on

l DC 19V output: 19V Light on

l DC 24V output: 24V Light on

Temperature Operating : 0° to 55° C / Storage: -40° to 70° C
Humidity Operating : 10% to 90% non-condensing

Storage: 5% to 90% non-condensing

Dimension ( W x D x H ) NMPD80 : 84.48*80*39.5mm ; BPL-1515 : 58.89*73mm
Weight NMPD80 : 100.2g ; BPL-1515 : 52.4g
Case of material ABS
Certifications TBD

** Specifications can be negotiated separately according to needs.

** Specifications can be negotiated separately according to needs.